I am finally conceeding to defeat....
I followed the instructions set in here (Aruba OS 6.2) and still have been unable to get my captive portal to work...
I have attempted the Guest-logon role, the Guest role, a combination of those two minus the v6, and have setup my own customized captive portal.
From what I have read online, if there is a DNS issue I will know by going to 1.1.1.1, and it is supposed to work....
I have now basically done two setups for the CP -- one on my own, and one following the instructions as best I could for what I need....
From what I can tell, it should have worked....
Does anyone have any suggestions? I'm sure it will be something simply stupid on my part but I have not been able to figure out what it may be.... I have attached snippets of the code in hope that someone might see something....
Anyone have any suggestions?
Thank you!!!!!!
#I basically added in the "guest-logon" and the "guest" combined together....in hopes that it would do something...
user-role WC-cp_prof
vlan 111
reauthentication-interval 120
captive-portal "WC-cp_prof"
access-list session logon-control
access-list session captiveportal
access-list session v6-logon-control
access-list session captiveportal6
access-list session http-acl
access-list session https-acl
access-list session dhcp-acl
access-list session icmp-acl
access-list session dns-acl
aaa profile "WC-aaa_prof"
initial-role "WC-cp_prof"
authentication-mac "default"
!
# the only odd thing that i see is that my current GUI says the default role is guest -- not guest-logon
aaa authentication captive-portal "WC-cp_prof"
server-group "WC_srvgrp-xdb84"
guest-logon
protocol-http
logon-wait minimum-delay 2
login-page "/upload/custom/WC-cp_prof/R-guest_2013-08-09-2.html"
switchip-in-redirection-url
!
wlan virtual-ap "WC-vap_prof"
aaa-profile "WC-aaa_prof"
ssid-profile "WC-ssid_prof"
vlan 111
!
ap-group "Testing"
virtual-ap "WC-vap_prof"