Security

Reply
Occasional Contributor I

Captive Portal for Users and MAC-auth or no auth for Apple-tv

Hi!

I have set up an environment with wpa2-psk for a Guest-network.

Once connected you need to authenticate to Captive Portal to change role to authenticated.

Now they want Apple-TV's to connect to the network and i dont know how to solve this.

The Idea was to enter their mac-addresses manually since it's not that many and put them in authenticated role this way. But I cant figure out how to do it.

Any help would be appreciated.

/Jesper

Re: Captive Portal for Users and MAC-auth or no auth for Apple-tv

Is this with ClearPass or controller only
Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
Occasional Contributor I

Re: Captive Portal for Users and MAC-auth or no auth for Apple-tv

Controller Only environment.

/Jesper

Guru Elite

Re: Captive Portal for Users and MAC-auth or no auth for Apple-tv

Take a look at user derivation rules in the user guide.

This allows you to override the role based on DHCP fingerprint or MAC address.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: