Security

Reply
New Contributor

Change Radius authentication method - IAP 305

Hi,

 

We are looking at setting up radius on IAP 305's but we are only able to get the AP's to authenticate via PAP.

 

We can't find the setting which would allow us on the IAP to change to a different authentication method.

 

This is the current setup for our radius.

image.png

Thanks

Guru Elite

Re: Change Radius authentication method - IAP 305

Are you using Captive Portal or 802.1x authentication (WPA2 enterprise) on that SSID?  Captive Portal only uses PAP.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
New Contributor

Re: Change Radius authentication method - IAP 305

It was captive portal, as this was a BYOD network.

So users were meant to logon with there AD Credentials.

 

So IAP's can only use PAP for captive portal authentication?

 

Thanks

Highlighted
Guru Elite

Re: Change Radius authentication method - IAP 305

In general, Captive Portal over radius only uses PAP.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: