Security

Reply
Contributor I

Clearpass acceptable latency in 6.7.x

Hi ,

I have two questions regarding latency are as below

What is the acceptable latency between the clearpass cluster nodes?

What is the acceptable latency between NAD device and ClearPass?

Highlighted
MVP Expert
MVP Expert

Re: Clearpass acceptable latency in 6.7.x

Hi,

 

from ClearPass Deployment Guide for version 6.7:

 

  • Aruba recommends that the round-trip time between the NAD/NAS and a ClearPass server should not exceed 600ms.
  • The acceptable delay between cluster nodes is less than100ms (RTT less than 200ms).
  • The link bandwidth should be greater than 10 Mbps.

Regards, Jö

Please give kudos, if you like my post.
Please Accept as solution, if my post was helpful.
Contributor I

Re: Clearpass acceptable latency in 6.7.x

Hi Jo,

Thanks for response but i guess above mentioned numbers are application for 6.4.x and 6.6.x.

I am looking for same information for 6.7.x
Guru Elite

Re: Clearpass acceptable latency in 6.7.x

They do not change from release to release.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: