Security

last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

Clearpass acceptable latency in 6.7.x

This thread has been viewed 11 times

  • 1.  Clearpass acceptable latency in 6.7.x

    Posted Feb 21, 2019 11:33 AM
    Hi ,

    I have two questions regarding latency are as below

    What is the acceptable latency between the clearpass cluster nodes?

    What is the acceptable latency between NAD device and ClearPass?



  • 2.  RE: Clearpass acceptable latency in 6.7.x
    Best Answer

    Posted Feb 21, 2019 11:53 AM

    Hi,

     

    from ClearPass Deployment Guide for version 6.7:

     

    • Aruba recommends that the round-trip time between the NAD/NAS and a ClearPass server should not exceed 600ms.
    • The acceptable delay between cluster nodes is less than100ms (RTT less than 200ms).
    • The link bandwidth should be greater than 10 Mbps.

    Regards, Jö



  • 3.  RE: Clearpass acceptable latency in 6.7.x

    Posted Feb 21, 2019 12:09 PM
    Hi Jo,

    Thanks for response but i guess above mentioned numbers are application for 6.4.x and 6.6.x.

    I am looking for same information for 6.7.x


  • 4.  RE: Clearpass acceptable latency in 6.7.x
    Best Answer

    EMPLOYEE
    Posted Feb 21, 2019 12:41 PM
    They do not change from release to release.