Security

Reply
Highlighted
Occasional Contributor II

Clearpass and CX-OS - user role switch access

Hi! I have been playing around with CPPM (6.8) in connection with Aruba CX-OS (10.04) and in particular trying the setup role based switch access. From what I understand so far there are basically only the following 3 user catagories supported in CX-OS (administrators, auditors and operators).

So far I haven't found in the Clearpass docs the attribute type and values I should be sending back to the switch as part of the TACACS+ authorization. Can anybody help me here?

Thanks, Scott


Accepted Solutions
Highlighted
MVP Expert

Re: Clearpass and CX-OS - user role switch access

Check this file ArubaOS-CX 10.04 Security Guide (8320, 8325, 8400 Switch Series)https://asp.arubanetworks.com/downloads/documents/RmlsZToxNjcxOGYxOC1mZjMxLTExZTktODU1ZC00ZjM0MjA1MzBiYjU%3D

Screenshot 2020-03-29 at 19.34.17.png


Rafael del Cerro Flores
ACMP, ACCP, ACDX#324, ACCX#711

View solution in original post


All Replies
Highlighted
MVP Expert

Re: Clearpass and CX-OS - user role switch access

Check this file ArubaOS-CX 10.04 Security Guide (8320, 8325, 8400 Switch Series)https://asp.arubanetworks.com/downloads/documents/RmlsZToxNjcxOGYxOC1mZjMxLTExZTktODU1ZC00ZjM0MjA1MzBiYjU%3D

Screenshot 2020-03-29 at 19.34.17.png


Rafael del Cerro Flores
ACMP, ACCP, ACDX#324, ACCX#711

View solution in original post

Highlighted
Occasional Contributor II

Re: Clearpass and CX-OS - user role switch access

Very much appreciated!!

 

I was applying the wrong priviledged levels, I tried all three levels (operator, administrator and auditor) using the levels 1, 15 and 19 and I could successfully control the user access priviledges. 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: