Security

Reply
FXE
Occasional Contributor II

Disabling TLS

Hi Guys, just want to ask if in CPPM 6.6.7, can disable TLS 1.0 and TLS 1.1 support? I can only see to disable TLS 1.0 but how about TLS 1.1.

Thanks

Re: Disabling TLS

Cluster wide parameters 

 

 

Screen Shot 2018-02-20 at 2.20.21 AM.png

 

Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.

Re: Disabling TLS

This is a screen shot of 6.7.1 but release notes says it was introduced in 6.6.3

l A new cluster-wide parameter lets you enable or disable TLS v1.1. To use this feature, go to the Administration > Server Manager > Server Configuration > 

Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
FXE
Occasional Contributor II

Re: Disabling TLS

Hi tarnold, in my version 6.6.7 I only see Disable TLS 1.0. Do I need to upgrade?

Re: Disabling TLS

No, I just check a 6.6.7 and it is listed. Screen Shot 2018-02-20 at 2.50.04 AM.png

Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
FXE
Occasional Contributor II

Re: Disabling TLS

sorry, I saw it now. I overlooked it. thanks

Guru Elite

Re: Disabling TLS

It is not recommended to disable 1.1.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: