Security

Reply
Highlighted
Occasional Contributor II

Re: Dynamic VLAN assignment with a single enforcement profile

yes, thats what I have now but was wondering if I could use just a single enforcement profile and pass the vlan ID somehow via a variable that is set during authorization?

Highlighted
Occasional Contributor II

Re: Dynamic VLAN assignment with a single enforcement profile

@cjoseph ?

Highlighted
Guru Elite

Re: Dynamic VLAN assignment with a single enforcement profile

How would the VLAN variable be defined?  What would it be tied to, a location or a network device?  How many different VLANs are we talking?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Re: Dynamic VLAN assignment with a single enforcement profile

Well, that was actually my question... is it possible and if so, how would the variable be defined during authorization.

Number of VLANs should of course be scalable.

I am guessing from the looks of it, it would work if the attribute is already assigned to the endpoint but not if it should be dynamically assigned as e.g. per the example I wrote.

 

Highlighted
Guru Elite

Re: Dynamic VLAN assignment with a single enforcement profile

As far as I know that is correct.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: