Security

Reply
Highlighted
Occasional Contributor II

EAP-MSCAHPv2 for the captive portal authentication

Hi All,

 

I have a small query. We are using IAP-105 with 6..1.3.4-3.1.0.0 version

 

Is it possible to use the PEAP-MSCHAPv2 in the external radius server for authenticating captive portal?

 

But with PAP it is workin fine but with MSCHAPv2 it is not working. 

 

Thanks in advance. 


Accepted Solutions
Highlighted
Guru Elite

Re: EAP-MSCAHPv2 for the captive portal authentication

It is not supported on instant at this time.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Guru Elite

Re: EAP-MSCAHPv2 for the captive portal authentication

Where are you configuring MsCHAPv2?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Re: EAP-MSCAHPv2 for the captive portal authentication

Hi, We are configuring in the external radius server.
Highlighted
Guru Elite

Re: EAP-MSCAHPv2 for the captive portal authentication

Ah.  I just realized that this is an instant AP.  Let me check to see if that is supported.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Occasional Contributor II

Re: EAP-MSCAHPv2 for the captive portal authentication

Hi,

 

Can anyone help me on my query?

 

Thanks in advance.

Highlighted
Guru Elite

Re: EAP-MSCAHPv2 for the captive portal authentication

It is not supported on instant at this time.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Highlighted
MVP

Re: EAP-MSCAHPv2 for the captive portal authentication

Some 3 years later my customer is also asking for this.

Since I cannot seem to find anything about this online or in manuals, could you confirm it is still not supported on Instants Colin?


Koen (ACMX #351 | ACDX #547 | ACCP)

-- Found a post helpful or important? Click the "Thumbs Up" icon to give kudos.
-- Problem Solved? Click "Accept as Solution" in a post.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: