06-02-2017 12:59 AM
I have set up CPPM to only use the mgmt port, and forward all traffic to the default gateway by default. Due to some reasons, I now need to forward traffic to a specific server via a different gateway. But no matter how I tried, it's always failed. Below is my current config and the commands I have tried with no success:
Please take a look and have some advice on what I did wrong.
Solved! Go to Solution.
06-02-2017 01:39 AM
Hey, my first concern is that the device is unable to find eth1? What kind of appliance is this? Is this a VM and has eth1 been attached to the underlying VM, only reason I am asking as I can't see if there is a MAC address assigned to eth1.
ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Re: Failed to add static route to CPPM
06-02-2017 02:59 AM
Thank you so much. That solved my problem :). Yes, my CPPM is an VM and after I connect another virtual network adapter to it, I can now add static route without any problems.
Thanks again for your help.