Security

Reply
New Contributor

Failure W-ClearPass Cumulative Patch 2 for 6.6.0 and 6.6.1

Hello, I'm new here. My name is Hubert. I have 2 Clear Pass VMs. one as a Subscriber and a publisher.

I want to import the latest patch 2 for 6.6.0. However, I get the following error: ". Download is stuck or interrupted Run Check Status Now and retry."

 If I want to import the patch manually then the following error message appears: "Please Error in processing request retry ...."

I'm stuck here. What can I do?

Greeting Hubert

Highlighted

Re: Failure W-ClearPass Cumulative Patch 2 for 6.6.0 and 6.6.1

On the download stuck sometimes if you hit save again on the sub ID It will clear the error, or TAC can clear the error. 

 

On you upload issues I seen issues with some browsers. Can you try a different browser?

Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
New Contributor

Re: Failure W-ClearPass Cumulative Patch 2 for 6.6.0 and 6.6.1

Hi Tarnlod,

Hi, I have the sub id removed and stored. Subsequently, the sub id added again. It's still the same message. What is a TAC? A support call? We have support from Dell? Where can I create a TAC?

 

Re: Failure W-ClearPass Cumulative Patch 2 for 6.6.0 and 6.6.1

TAC is aruba/HPE support. If you are running a dell CPPM then I believe you will need to contact Dell. If you contact TAC they can tell you.
Thank You,
Troy

--Give Kudos: found something helpful, important, or cool? Click Kudos Star in a post.

--Problem Solved? Click "Accepted Solution" in a post.
New Contributor

Re: Failure W-ClearPass Cumulative Patch 2 for 6.6.0 and 6.6.1

Hello, I was able to solve Probelm where I update to the CLI using the command "system update -i http: //meinwebserver/CPPM-x86_64-20160819-clearpass-6.6-updates-2-dell-66-patch.signed tar "have installed.

Thank you very much

MVP
MVP

Re: Failure W-ClearPass Cumulative Patch 2 for 6.6.0 and 6.6.1

I got similar issues when update from 6.7.7 to 6.7.8, but the real reason was that my diskspace was running out in my HomeLAB enviroment (didnt mention that from the webgui). This article point me in the right way, thanks!

 

For a easy webserver without need to install it, i would recommend "usbwebserver" http://www.usbwebserver.net/webserver/

Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP - Was this post usefull, Kudos are welcome.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: