Security

last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

How to check health status of Virtual machines on local network

This thread has been viewed 0 times

  • 1.  How to check health status of Virtual machines on local network

    Posted May 17, 2018 12:08 AM

    Hi, we are planning to deploy OnGuard in the network and now it is in testing. Almost we have tested the OnGuard on test environment but our issue is we are unable to do a health check of the virtual machines in the local network but at the same time health check is performed on the host server. At present we are testing this in a wireless environment with Aruba controller and Clearpass OnGuard.

     

    Our requirement is all the machines in LAN including virtual machines should meet minimum compliance to connect to the network. How can we achieve this? Can anyone guide me on this? Virtual machines are connected through Bridge or NAT mode of the host adaptor.

     

    Thanks,

    Yugandhar.



  • 2.  RE: How to check health status of Virtual machines on local network

    EMPLOYEE
    Posted May 22, 2018 10:42 AM

    Unfortunately, enforcement of VM posture with NAT mode is not possible.



  • 3.  RE: How to check health status of Virtual machines on local network

    Posted May 22, 2018 10:51 AM
    Ok, but how to check health status of bridged virtual machines. Please help me on this.

    Get Outlook for Android