Security

last person joined: yesterday 

Forum to discuss Enterprise security using HPE Aruba Networking NAC solutions (ClearPass), Introspect, VIA, 360 Security Exchange, Extensions, and Policy Enforcement Firewall (PEF).
Back to discussions
Expand all | Collapse all

How to set the Administrator Login session length. The instructions for 6.3 do not work

This thread has been viewed 1 times

  • 1.  How to set the Administrator Login session length. The instructions for 6.3 do not work

    Posted Mar 03, 2015 12:49 PM
    I have CPPM 6.3, the instructions and a knowledge article show the syntax to change the administrator login session timeout. As I SSH into the publisher and enter "loginsession timeout 900", for example, I get the following error message: [appadmin@**********]# loginsession timeout 900 ERROR: loginsession: command not supported Type 'help' for more options Same error message for "web-server sessiontimeout 900 Does someone have an answer to this issue?


  • 2.  RE: How to set the Administrator Login session length. The instructions for 6.3 do not work

    EMPLOYEE
    Posted Mar 03, 2015 12:50 PM
    This is now configurable in the web UI in 6.5.


    Thanks,
    Tim


  • 3.  RE: How to set the Administrator Login session length. The instructions for 6.3 do not work

    Posted Mar 03, 2015 04:11 PM
    Thanks Tim, I really need to change the login session length in 6.3. Do you know how to do that?


  • 4.  RE: How to set the Administrator Login session length. The instructions for 6.3 do not work
    Best Answer

    EMPLOYEE
    Posted Mar 03, 2015 05:12 PM
    its hard coded you can not.


  • 5.  RE: How to set the Administrator Login session length. The instructions for 6.3 do not work

    Posted Mar 03, 2015 05:21 PM

    Troy, thank you for the information on the hard coded admin session lenght. 

     

    The CLI statements I posted earlier are AurbaOS controller commands; explaining why they did not work on Clearpass.