Security

I dears,

Please help me on this issue:

I configure the Aruba 650 with the AP135 but the SSID cannot be displayed.

The AP provisionning is OK, WLAN are OK (I created 1 ssid for Guest with captive portal and 1 for the employee with the WPA Shared Key)

The AP cannot show the SSID.

 

THank you for your helps.

Please provide the output of:

 

Show ap database

Show ap-group <group name that AP135 belongs to>

Show wlan virtual ap <Employee or guest virtual AP>

Show wlan ssid profile <SSID profile for employee or guest>

 

Aruba650) #show ap database

AP Database
-----------
Name  Group              AP Type  IP Address    Status  Flags  Switch IP
----  -----              -------  ----------    ------  -----  ---------
AP1   Multelec-visiteur  135      192.168.10.5  Down    2      192.168.10.100

Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
       I = Inactive; H = Using 802.11n license; D = Dirty or no config
       X = Maintenance Mode; P = PPPoE AP; B = Built-in AP
       R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP; c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2
       M = Mesh node; Y = Mesh Recovery

Total APs:1

(Aruba650) #show ap-group Multelec-visiteur

AP group "Multelec-visiteur"
----------------------------
Parameter                                Value
---------                                -----
Virtual AP                               multelec-employee-vap_prof
802.11a radio profile                    default
802.11g radio profile                    default
Ethernet interface 0 port configuration  default
Ethernet interface 1 port configuration  default
Ethernet interface 2 port configuration  shutdown
Ethernet interface 3 port configuration  shutdown
Ethernet interface 4 port configuration  shutdown
AP system profile                        apsys_prof-aap84
802.11a Traffic Management profile       N/A
802.11g Traffic Management profile       N/A
Regulatory Domain profile                default
RF Optimization profile                  default
RF Event Thresholds profile              default
IDS profile                              default
Mesh Radio profile                       default
Mesh Cluster profile                     N/A
Provisioning profile                     N/A
AP authorization profile                 N/A


(Aruba650) #show wlan ssid-profile multelec-employee-ssid_prof

SSID Profile "multelec-employee-ssid_prof"
------------------------------------------
Parameter                                         Value
---------                                         -----
SSID enable                                       Enabled
ESSID                                             multelec-employee
Encryption                                        wpa2-psk-aes
DTIM Interval                                     1 beacon periods
802.11a Basic Rates                               6 12 24
802.11a Transmit Rates                            6 9 12 18 24 36 48 54
802.11g Basic Rates                               1 2
802.11g Transmit Rates                            1 2 5 6 9 11 12 18 24 36 48 54
Station Ageout Time                               1000 sec
Max Transmit Attempts                             8
RTS Threshold                                     2333 bytes
Short Preamble                                    Enabled
Max Associations                                  64
Wireless Multimedia (WMM)                         Disabled
Wireless Multimedia U-APSD (WMM-UAPSD) Powersave  Enabled
WMM TSPEC Min Inactivity Interval                 0 msec
Override DSCP mappings for WMM clients            Disabled
DSCP mapping for WMM voice AC                     56
DSCP mapping for WMM video AC                     40
DSCP mapping for WMM best-effort AC               24
DSCP mapping for WMM background AC                8
Multiple Tx Replay Counters                       Disabled
Hide SSID                                         Disabled
Deny_Broadcast Probes                             Disabled
Local Probe Request Threshold (dB)                0
WEP Key 1                                         N/A
WEP Key 2                                         N/A
WEP Key 3                                         N/A
WEP Key 4                                         N/A
WEP Transmit Key Index                            1
WPA Hexkey                                        N/A
WPA Passphrase                                    ********
Maximum Transmit Failures                         0
BC/MC Rate Optimization                           Disabled
Rate Optimization for delivering EAPOL frames     Disabled
Strict Spectralink Voice Protocol (SVP)           Disabled
High-throughput SSID Profile                      multelec-employee-htssid_prof
802.11g Beacon Rate                               default
802.11a Beacon Rate                               default
Advertise QBSS Load IE                            Disabled

Your AP status is showing Down?

It was down when i sent the command outputs. But even if it ils up, I have thé dame issue.

Sorry, the typing was not correct.
Thanks for you reply, the AP was down when I run the command, but even if is up, I have the same issue. It still cannot broadcast the SSID.

Dears,
Please you have solutions?
I can see the AP UP bit it cannot show the SSID. Please

Send the same commands with the AP as UP so we can see what flags it has. Also you never sent the command for the virtual-ap configuration.

 

Do you have licenses?

#show license verbose

 

Do you have the client VLANs available on the controller?

#show vlan

 

Cheers,