Security

I try to deploy clearpass OVF 

But There is error . who know how to solve this problem

 

You need to add the required hard drive. Please read the vm install guide and it will take you step by step. You also need to make sure you allocate the correct memory and cores.

• 8 Virtual CPUs
• Disk space:
• 500 GB disk space required for existing deployments (upgrading from 6.2.6, 6.3.6, or 6.4.x)
• 1000 GB disk space recommended for new deployments
• 8 GB RAM
• 2 Gigabit virtual switched ports

 

I deploy OVF following this spec but it still have error

 

Per your screenshot you did not add the hard drive.

Is it Hard disk ?? or not

 

You are not suppose to modify the default drive. You will need to delete the VM and redeploy. On page 6 of the install guide it clearly states you need to add an additional drive. .

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_Download/Default.aspx?EntryId=16490

Judging from the last screenshot, you deleted SCSI 0:0. This disk is 20GB and needs to remain permanently. It is the install and boot disk. You did add the additional SCSI 0:1 disk, but deleting the SCSI 0:0 disk will not work.

Please read the VM installation guide.

 

https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/Command/Core_ViewDetails/Default.aspx?EntryId=16490

You have to add another hard disk