Security

Reply
Guru Elite

Re: IAP-103 EAP-TLS Auth Failure with Cisco ISE

It is quite possible that the ISE server might require a vendor specific attribute that is present on the previous infrastructure, but does not exist in the Aruba infrastructure.  They might want to make the "service" as bare-bones as possible on the ISE side so that only the minimum necessary to authenticate an EAP-TLS client is configured.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Guest Blogger

Re: IAP-103 EAP-TLS Auth Failure with Cisco ISE

That is a good point. A few years ago I recall having to add a vendor-specific attribute to a CPPM server when configuring a FortiGate 60C as a supplicant. I will forward that to the other engineers as well. Thanks.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: