Security

Reply
Contributor I

Link device to service

I created a Network>Device with name "XX001". 

 

Can I use this device name in the service rules as a condition to filter the requests for this service? If yes, what is the Type and Name of the attribute?

 

Or do you have to use NAS-identifier to identify the access device?

Guru Elite

Re: Link device to service

You would use Connection: NAD-IP-Address EQUALS <device-IP>


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor I

Re: Link device to service

Thanks Tim. So you confirm there is no option to use the device name in the service rules right ?

Guru Elite

Re: Link device to service

Correct. If you need to use text, you could add a custom attribute to the device. 

Sent from Nine

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: