Security

Reply
Highlighted
Occasional Contributor II

MAC Authentication And DHCP Profiling

I am working on getting MAC Authenticaton working with Clearpass and Cisco Switches.

 

I am having a hard time to get a device profiled correctly. I have ClearPass entered as a helper address. The problem I am having is trying to move a device into a role that only allows DHCP and then bounce the port to get the device profiled.

 

I see the device get the correct role and I have a profile that downloads an ACL and then it is supposed to bounce the port the cient is connected to. 

 

The problem is that the ACL gets downloaded correctly but the client port never gets bounced. I can manually disconnect the client by changing the status. 

 

I need to be able to bounce the port automatically. 

 

I have posted my profile I am working with.

 

Any help is appreciateProfile.JPG

Highlighted
Moderator

Re: MAC Authentication And DHCP Profiling

Did you follow the ClearPass Solution Guide for Wired Policy Enforcement?


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Highlighted
Occasional Contributor II

Re: MAC Authentication And DHCP Profiling

Yes that is the guide I am following.

Highlighted
Moderator

Re: MAC Authentication And DHCP Profiling

It shows the required configuration for a profile state and the profiler service function.


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: