I'm authenticating against a CPPM server and the service rule that I should be hitting includes a device location rule. When I authenticate, the RADIUS request isn't matching up with the service rule. In Access Tracker, the computed attributes shows the correct src-ip-address of the local controller that my request is coming from, but the NAD-ip-address is the master controller's IP. I believe this is what is causing the Device:Location to be incorrect.
I need to setup the master and two local controllers to send their own IP address in the RADIUS request so I can differentiate between them when using a service rule in CPPM. On the controllers, I see a NAS IP address and Source Interface under Security > Authentication > Advanced. The NAS IP address entered is the master's and the source interface is the local's loopback. Is the NAS IP what I need to change on each controller?