Security

Reply
Moderator

Re: Not Redirecting to Amigopod Captive Portal

Once your test client has connected to the guest ssid, try doing a show user-table from the CLI and check what initial role the device is in. You need to then make sure the captiveportal policy is listed in this Role similar to my previous post.

Occasional Contributor I

Re: Not Redirecting to Amigopod Captive Portal

Thank you all for your help.  I've gotten one step further and can now get the captive portal redirecting properly to force a login, VLAN associated with the guest wireless was missing an IP.  However, after I login it looks like it's trying to pass credentials to the controller IP but then the browser fails with a message stating the connection was interrupted.

Moderator

Re: Not Redirecting to Amigopod Captive Portal

I would suggest checking what IP address or hostname you have configured in the Amigopod Web Login setup. This address will need to be accessible from the guest device based on the VLAN and firewall rules included in your initial role.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: