Hello Community.
I try to set up onboarding in my demo Lab. I can provision my device i get a certificate enrolled. When my Client ( iPhone, OSX or Windows) than tries to connect over eap-tls i get an error.
Error Code:
215
Error Category:
Authentication failure
Error Message:
TLS session error
Alerts for this Request
RADIUS EAP-TLS: warning alert by client - close_notify
eap-tls: Error in establishing TLS session
In the Logs i get the following error:
2016-05-31 15:45:19,963 [Th 10 Req 2345 SessId R0000015e-01-574d956f] ERROR RadiusServer.Radius - TLS Alert read:warning:close notify
2016-05-31 15:45:19,963 [Th 10 Req 2345 SessId R0000015e-01-574d956f] ERROR RadiusServer.Radius - TLS_accept:failed in SSLv3 read client certificate A
2016-05-31 15:45:19,963 [Th 10 Req 2345 SessId R0000015e-01-574d956f] ERROR RadiusServer.Radius - rlm_eap_tls: SSL_read failed in a system call (-1), TLS session fails. error:140940E5:SSL routines:ssl3_read_bytes:ssl handshake failure
2016-05-31 15:45:19,963 [Th 10 Req 2345 SessId R0000015e-01-574d956f] ERROR RadiusServer.Radius - rlm_eap_tls: TLS Handshake failed
I use CPPM as local root CA. I have only self signed certificates. I unchecked under "guest --< Configuration --> Authentication --> Require HTTPS for guest access"
In the Onboard --> Network Settings --> Trust is al on automatic.
I also tried to configure ist manually but i am also not shure what to configure there.
I despair with the onboarding!
I don´t know why i will not work.
Regards Stefan