Hi:
I’m trying to get Onboard working with ADCS.
I’ve followed the instructions in the user guide about setting up Onboard as an Intermediate CA to ADCS. – Created a CSR, retrieved a certificate from ADCS, and installed the chain in Onboard.
I’ve also followed the directions in the ADCS Tech note.
Basically, everything works until the very last step.
The initial Provisioning with EAP-PEAP, Pre-Auth, Downloading Quickconnect, and Auth all work fine.
After the wireless profile is configured, user hits the button to connect and it eventually times out. A second Provisioning service hit does not appear in Clearpass.
A certificate is being issued by ADCS, so all the weblogin setup as the user is working from Clearpass to ADCS. That same certificate appears on Onbaord, and also in the user’s Personal Certificate store.
But when I click to connect to the WLAN, I just get an error on the client.
Not see any service hit in Clearpass is confusing to me. Does that mean the client is never sending an EAPOL START?
If use this same setup with Onboard as a root CA (no ADCS integration), everything works fine.
Thoughts?
Thank you.