Security

Reply
Occasional Contributor II

Quickconnect fails with QGtkStyle could not resolve GTK.

Running quickconnect on Ubuntu 18.04.03 LTS.

 

The GUI installer runs, but after the progress bar completes at the Configuring your system step, it errors;

 

QGtkStyle could not resolve GTK. Make sure you have installed the proper libraries.

 

CPPM version is 6.7.10

 

 

Occasional Contributor II

Re: Quickconnect fails with QGtkStyle could not resolve GTK.

Also tried on Ubuntu 19.04

 

The GUI installer runs, but loops the progress bar at the Configuring your system step - so have the close the app.

Get the same error in the terminal window, QGtkStyle could not resolve GTK. Make sure you have installed the proper libraries.

There's also a bunch of python errors, finally followed by;

KeyError: dbus.UInt32(30L, variant_level=1)

 

 

 

Highlighted
Guru Elite

Re: Quickconnect fails with QGtkStyle could not resolve GTK.

We added this to the release notes for 6.8.2 as a known issue:

 

While onboarding an Ubuntu 18.04 device in a non-root shell environment, a segmentation fault error is sometimes seen and the error message “QGtkStyle could not resolve GTK. Make sure you have installed the proper libraries. Segmentation fault (core dumped)” is displayed.
Workaround: Execute the onboarding script again.


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Occasional Contributor II

Re: Quickconnect fails with QGtkStyle could not resolve GTK.

Hi Tim,

 

I ran the onboarding script again on both 18.04.03 and 19.04 without success. 

If it is noted in the 6.8.2 CPPM notes, does this mean it won't be addressed in the 6.7.x release?

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: