Security

Reply
Frequent Contributor I

Re: Radius COA problem between controller and clearpass

thanks for your reply

 

I just changed all the passwords, test with another enforcement policy and profile, with another controler, with another service etc ...., i think i have tested all that i could :)

Yesterday i have opened a case, i'm in waiting to reply from them.

 

Thanks for your help, Happy Holidays

 

Regards

 

Yann

Frequent Contributor I

Re: Radius COA problem between controller and clearpass

For your information, my AP is in RAP Mode and the VAP is in Bridge mode

I just configure my VAP in tunnel mode and  the CoA works good now !  

 

My question : is there  a prerequisite of works for CoA in bridge mode ?

 

regards

 

Yann

Trusted Contributor I

Re: Radius COA problem between controller and clearpass

thanks for reporting back about your finding. sounds like a possible reason for it not working. tried to find a source saying this is indeed the issue, but can't find one. hopefully your ticket with TAC will give  a definite answer. be sure to relay that.

Guru Elite

Re: Radius COA problem between controller and clearpass

Yann Dorval,

 

What version of ArubaOS are you using?

 

Are you sending radius accounting information to clearpass?

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Frequent Contributor I

Re: Radius COA problem between controller and clearpass

Hi Cjoseph,

 

The Version 6.4.2.2 is install on controller.

 

Yes, i send the radius accounting information from the controller to clearpass.

 

Regards

 

Yann

Highlighted
Frequent Contributor I

Re: Radius COA problem between controller and clearpass

I confirm, with one CAP on the VAP in tunnel mode,it's works well, but when i configure the VAP in bridge mode, i have the message "Session-Context-Not-Found"

Capture001.JPG

Trusted Contributor I

Re: Radius COA problem between controller and clearpass

what is TAC saying about this, is there no way to pull this off with a bridged SSID?

Frequent Contributor I

Re: Radius COA problem between controller and clearpass

Hi Boneyard,

 

yes, they answered me ... "CoA will not be supported in the bridge mode", it's a big problem for my project ...

 

coa.jpg

 

Thanks you for your help

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: