Security

Reply
Super Contributor I

Requested priv_level Mismatch

I am trying to setup TACACS controller’s authentication for guest provisioning. I got a privilege level mismatch message: “Requested priv_level=[0f] greater than Max Allowed priv_level=[00]”.
So I went to Enforcement Profiles and change the service to privilege level from 15 to 0 as the message suggested, but the error is still the same. CPPM still registers the priv_level “0f“ and denies access.

 

My CPPM is 6.5.0.71095.  AOS 6.3.1.8

 Capture.JPG

~Trinh Nguyen~
Boys Town
Guru Elite

Re: Requested priv_level Mismatch

Use the cpass:HTTP service and attribute

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: