Hi,
Aruba 620, AP105, ArubaOS 5.0.4.2.
I have two SSID's "USER" & "CERT" I want to restrict the USER SSID so that it will only Authenticate PEAP-MSChapV2 and the CERT SID so that only users certificates can be used. The dot1x profiles are configured as below:
aaa authentication dot1x "CERT-dot1x_prof"
termination eap-type eap-tls
!
aaa authentication dot1x "USER-dot1x_prof"
termination eap-type eap-peap
termination inner-eap-type eap-mschapv2
The issue is I can Authenticate on either SSID using either Authentication method.
What possible solutions are there to this issue?
Regards,
Nigel