Security

Reply
Occasional Contributor II

Server 2008 (R2) and MAC Authentification

Hi again,

 

I try to configure my server 2008 to do MAC authentification ... I also use this server as logon server with mschap, this works great.

My question is: can i use my radius server to do mac authentification and logon?

 

I want to get the MAC-adresses out of my active directory...  is this possible?

 

Thanks!

Guru Elite

Re: Server 2008 (R2) and MAC Authentification

Please try this technet article here:  

 

http://blogs.technet.com/nap/archive/2006/09/08/454705.aspx

 

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor II

Re: Server 2008 (R2) and MAC Authentification


cjoseph wrote:

Please try this technet article here:  

http://blogs.technet.com/nap/archive/2006/09/08/454705.aspx


If i klick on this link i get an Outlook Web App- Page ....is that correct?

I found that link before but i always get this...

Guru Elite

Re: Server 2008 (R2) and MAC Authentification

I fixed the link.  Not sure why it was doing that...

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor II

Re: Server 2008 (R2) and MAC Authentification


cjoseph wrote:

I fixed the link.  Not sure why it was doing that...

 


Sorry but is this the right link? Title is "Certificate Autoenrollment in Windows XP"?!

Guru Elite

Re: Server 2008 (R2) and MAC Authentification

No.  lets try this one more time:

 

http://blogs.technet.com/nap/archive/2006/09/08/454705.aspx

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor II

Re: Server 2008 (R2) and MAC Authentification

Thanks!

 

This solution is not the best for our constellation... Is it possible to let the aruba controller check if a mac-adress is in the active-directory and then do the MSCHAP-Logon?

 

Sorry for the bad english.

 

 

Guru Elite

Re: Server 2008 (R2) and MAC Authentification

The general answer is yes.  You can create  mac authentication profile and mac authentication server group in the same AAA profile that you do 802.1x

 

The big question is: do you already have all of these mac addresses stored somewhere?  The issue is adding/deleting and maintaining the mac addresses either as users in Active Directory or Users in the local database on the controller.

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Occasional Contributor II

Re: Server 2008 (R2) and MAC Authentification


cjoseph wrote:

 

The big question is: do you already have all of these mac addresses stored somewhere?  

 


No.

Guru Elite

Re: Server 2008 (R2) and MAC Authentification

Okay.  The instructions to configure mac-based authentication is here:  How do I configure MAC-based authentication on Aruba? https://kb.arubanetworks.com/app/answers/detail/a_id/1126

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: