Frequent Contributor II

TACACS access for cisco devices

Hi Folks,

I am trying to enable TACACS access for Some cisco devices (Switch, WLC, Firewall) Using Clearpass.

Below is the screenshot of enforcement profile.


In above pic you can see that privileged level is 15 and CiscoWLC:Common-role1-ALL.

I am little bit confused which one I actually need, the privileged one or this CiscoWLC:Common or both.

Guru Elite

Re: TACACS access for cisco devices

Take a look at this ASE solution:

| Tim Cappalli | Aruba Security | @timcappalli | |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Frequent Contributor II

Re: TACACS access for cisco devices

I checked and there only privileged level is configured.

so that means privileged level is required, rest of the things arenot mandatory ..


Search Airheads
Showing results for 
Search instead for 
Did you mean: