Security

Reply
Highlighted
Occasional Contributor II

Wired deployment query

Hello,

I have a specific query for a customer.
They have a common vlan for laptop,printer ,camera and creating separate vlan is not an option for them.

Now eap tls is being proposed for laptops and rest all authenticate via mab . We use DHCP profiling and we will be using open mode for first 3 months .
My query as we are not doing vlan enforcement, what parameter cppm will return as successfull eap-tls or successful mab ?

We will be doing enforcement later after 3 months .but for open mode what is enforcement parameters or attribute even though enforcement does not block anything as we are using open mode and allow all initially
Highlighted
MVP Expert

Re: Wired deployment query

What type of switch are you using ?



Thank you

Victor Fabian

Pardon typos sent from Mobile
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Occasional Contributor II

Re: Wired deployment query

We have both Cisco and hope in the customer network
Highlighted
Occasional Contributor II

Re: Wired deployment query

I mean hpe
Highlighted
MVP Expert

Re: Wired deployment query

If you are looking for more visibility you can return a user-role per use case (laptop , VoIP , etc)



Thank you

Victor Fabian

Pardon typos sent from Mobile
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Moderator

Re: Wired deployment query

I would recommend following the ClearPass Solution Guide for Wired Policy Enforcement.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: