Security

Reply
Highlighted
Contributor I

clearpass deployment

Hello Every body 

 

iam working in aruba partener and i am new in working with clearpass last week i had puc with one of our customer this customer has cisco ip phone that connected to cisco switch , and other port connected to Desktop , i configured onguard on clearpass and using enforcement profile to assing vlans based on enforcement profile the problem is when i connect ip phones to switch it can get ip address from dhcp but the desktop that connected to this ip phone cannot get ip address from dhcp and it is work correctely without clearpass so what is the correct configuration for both voice and data vlan assignment 

 

Thanks My Dear Friends 

Guru Elite

Re: clearpass deployment

Please take a look at the ClearPass Solution Guide for Wired Policy Enforcement.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor I

Re: clearpass deployment

OK Thanks For your reply Eng. Cappalli 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: