Security

Reply
Highlighted
Contributor I

manually change the device category, the coa not works.

About the Radius CoAI have a question.

I have a 802.1x authentication service and enable the profiler,I select the any category/os family/name whitch an change must be tirger aruba terminate session

When a device match the 802.1x authentication service,the clearpass can profiler the device and the radius coa works fine.

But,I manually change the device category in the endpoint,but the clearpass do not perform coa. Why?

Highlighted
Moderator

Re: manually change the device category, the coa not works.

That's correct. You'd need to manually issue the CoA/DM from access tracker.


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Highlighted
Contributor I

Re: manually change the device category, the coa not works.

Thanks a lot!

 

So I manually change the device category in the endpoint,the clearpass can not automatically perform coa action?

 

Highlighted
Moderator

Re: manually change the device category, the coa not works.

Correct


If this response is more than 1 year old, it may no longer be accurate. Please consult official Aruba documentation, TAC or your Aruba SE.

| Aruba Alumni | @timcappalli | timcappalli.me |

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: