Security

Reply
Contributor I

profiling 802.1x

Hi,

 

 I'm trying 802.1X on an Aruba deployment but on the clearpass cannot get the device profiling like: Computer, Phone, windows, android, etc..

 

 I can get them when performing captive portal but not with 802.1X.

 

 Suggestions..

Guru Elite

Re: profiling 802.1x

Do you have DHCP helper addresses pointed to ClearPass?

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor I

Re: profiling 802.1x

Where shoul I set that? I'm in an instant scenario.

Guru Elite

Re: profiling 802.1x

Wherever the L3 gateway is for the client.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor I

Re: profiling 802.1x

You mean, if my gateway is the firewall, should I set up that on the firewall?

Guru Elite

Re: profiling 802.1x

Yes, wherever the default gateway for the client is.

| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
New Contributor

Profiling with GreatBay

Is Aruba Profling better than Greatbay Software Profiler?

Guru Elite

Re: Profiling with GreatBay

Of course it is! Are you considering deploying ClearPass at Cisco?

Be sure to reach out to your local Aruba team to get started.


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Contributor I

Re: profiling 802.1x

Why do i need to set that when doing the 802.1x and not for the captive portal?

Guru Elite

Re: profiling 802.1x

With 802.1x, profiling takes place after successful authentication, so the device needs to have been authenticated first, before being profiled.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: