Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor II

2530 YA or YB firmware

I've never noticed that there are YA and YB firmwares.

 

I couldn't find what is the difference.

 

 

Highlighted

Re: 2530 YA or YB firmware

That's correct. Below you'll find a list of SKU's supported by which software:

 

“YA” software is for the following 2530 skus: J9772A, J9773A, J9774A, J9775A, J9776A, J9777A, J9778A, and J9781A

 

“YB” software is for the following 2530 skus: J9779A, J9780A, J9782A, J9783A, and JL070A

 

Hope this will support you!

MVP Guru

Re: 2530 YA or YB firmware

Also, the release notes mention which switch type needs which firmware. All gigabit switches use YA, and if you do a 'show version' on your switch you can see the 'family':

sw01# show version

Image stamp:    /ws/swbuildm/rel_yakima_qaoff/code/build/lvm(swbuildm_rel_yakima_qaoff_rel_yakima)
                Feb 27 2019 22:59:29
                WC.16.08.0002
                422
Boot Image:     Primary

Boot ROM Version:    WC.16.01.0006
Active Boot ROM:     Primary

The example above is a 2930F. On your switch, you will see YA or YB. Then take that version for the firmware to upload.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: