Hi
I am implementing a network with 802.1x on the ports, on the switches i will have ports used for Aruba AP and to make life easy i will use profiling
device-profile name ap
untagged-vlan 110
exit
device-profile type "aruba-ap"
associate "ap"
enable
exit
When using authenticator on the ports, the port is closed until sone EAP traffic open the port therefor i use
aaa port-access use-lldp-data
to get LLDP into a "Closed" port. This works but then
802.1x stops working, and when removed 802.1x works again but the profiling stops working
aaa port-access authenticator 1/1-1/48,2/1-2/48
aaa port-access authenticator 1/1-1/48,2/1-2/48 client-limit 10
aaa port-access authenticator active
Am i missing som command to have both functions working
or is this the design??
Running 16.5.0009 (due to other issues) Tried 16.6 same issue.