Wired Intelligent Edge

last person joined: yesterday 

Bring performance and reliability to your network with the HPE Aruba Networking Core, Aggregation, and Access layer switches. Discuss the latest features and functionality of your switching devices, and find ways to improve security across your network to bring together a mobile-first solution
Back to discussions
Expand all | Collapse all

2930F VSF

This thread has been viewed 7 times

  • 1.  2930F VSF

    Posted Jun 07, 2018 07:08 AM

    Hello Everyone,

    I am trying to perform VRF on Aruba 2930F.
    However Iam getting the following error.

    VSF port failure on link 1 port 1/51: 

    Peer port 52 is not VSF enabled


    ST1-CMDR: VSF port 1/51 is in error state

    ----  Bottom of Log : Events Listed = 255  ----

     




    Can you provide an solution for the same. Thanks in advance.



  • 2.  RE: 2930F VSF

    EMPLOYEE
    Posted Jun 07, 2018 11:29 AM

    Greetings!

     

    What version of software are you running on each 2930F?  Also, is there an existing configuration on the switch you're trying to add to the VSF fabric?



  • 3.  RE: 2930F VSF

    Posted Jun 07, 2018 11:44 AM
    Hi Mathew,

    Thanks for your response.
    This is the version WC.16.04.0008
    There is no existing configuration on the switches.

    Regards,
    Haresh Niwate


  • 4.  RE: 2930F VSF

    Posted Jun 08, 2018 08:16 AM

    Hello everyone,

    I just performed reset on the second switch using the following commands and later vsf worked as expected.

     

    reset system configuration
    reload

    Regards,
    Haresh Niwate