Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
New Contributor

2930f Stacking cable

Hi,

 

I am looking to stack two JL261A Hewlett Packard Enterprise Aruba 2930F switches, but told by the vendor i would need fibre transceiver modules to achieve this. I thought that all i need was dac cable between the two. Do anyone have a part code for this cable or the 3rd party vendor right

 

Regards


Accepted Solutions
Highlighted
New Contributor

Re: 2930f Stacking cable

Thanks for the information, copper connection will suffice

Kind Regards

View solution in original post


All Replies
Highlighted

Re: 2930f Stacking cable

Hi Ivan,

Aruba dont have 1G DAC cables.2930F 4SFP series support any port up to 8x1G ports for stacking. If you don't have 1G fiber/Copper transceiver you can use the 1G copper port for stacking.

Dinusha Chandrasinghe
Network Engineer -Enterprise System Solution @PlexusGlobal
ACMP | ACSP | ACCA | MCSA
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*


Highlighted
New Contributor

Re: 2930f Stacking cable

Thanks for the information, copper connection will suffice

Kind Regards

View solution in original post