Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor II

3400 Controller 6.4 update with AP135

Hello,

 

I am having some issues with NPS and I beleive updating my 3400 controller from 6.3 to 6.4 may help the issue are there any compatibility issues with the AP135s?

 

Thanks

 

Guru Elite

Re: 3400 Controller 6.4 update with AP135

Authentication issues with NPS should be independent of what access point you use.  What is the problem?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Highlighted
Occasional Contributor II

Re: 3400 Controller 6.4 update with AP135

Colin,

 

I agree, I believe updating the ArubaOS from 6.3 to 6.4 may help I don't believe the type of APs is causing any issues we have a mix of 225 and 135 APs. I wanted to make sure that the 135 are compatible with the 6.4 OS. Ths issue we are having is I cannot get any windows 7 or 10 machines to connect to our 802.1x NPS server (Server 2012), termination is on the Aruba controller. MacOSX machines are connecting fine. I read it could be a TLS issue?

 

Thanks

 

Guru Elite

Re: 3400 Controller 6.4 update with AP135

I would look into moving the Termination to the NPS server by installing a Server Certificate that your clients trust and disabling termination on the Aruba Controller.  It is possible that your clients do not trust the Certificate on the Aruba Controller.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: