Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
New Contributor

3810 Dac compatiblity

We are purchasing some 3810's for some new ToR switches. They list the D series DAC cables in the data sheet on the website. We have a bunch of B series DAC cables we would love to reuse. Mostly 
J9281B 1m & J9283b 3m. Are they any issues I will run into using the older cables?


Accepted Solutions
Highlighted
MVP Expert
MVP Expert

Re: 3810 Dac compatiblity

They will work without any issues in an 3810M switch.

 

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c05115518

 

Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP | Ekahau ECSE Design - Was this post usefull, Kudos are welcome.

View solution in original post


All Replies
Highlighted
MVP Expert
MVP Expert

Re: 3810 Dac compatiblity

They will work without any issues in an 3810M switch.

 

https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c05115518

 

Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP | Ekahau ECSE Design - Was this post usefull, Kudos are welcome.

View solution in original post

Highlighted
MVP Guru

Re: 3810 Dac compatiblity

Aruba 3810M currently supports (no matter the running ArubaOS-Switch software version [*]):

 

  • J9281B
  • J9281D
  • J9283B
  • J9283D
  • J9285B
  • J9285D

Reference: ArubaOS-Switch and ArubaOS-CX Transceiver Guide (9th Edition) September 2020 (page 59/91).

 

Note 1: DAC Cables are for use in JL071A, JL072A, JL073A, Jl074A and JL076A when those switch models are equipped with the JL083A Aruba 3810M/2930M 4SFP+ MACsec Module.

 

Note 2: DAC Cables are for use in JL075A front SFP+ ports or are for use when the JL075A is equipped with the JL083A Aruba 3810M/2930M 4SFP+ MACsec Module.

 

[*] Always better to run latest software.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: