Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Occasional Contributor II

3810M backplane stacking

I have 3 3810M switches. I need to stack it. Can someone list detailed steps to do it?

MVP Expert

Re: 3810M backplane stacking

Do you have all necessary Stacking Modules and related Stacking Cables?
Occasional Contributor II

Re: 3810M backplane stacking

Yes everything needed is there.

Re: 3810M backplane stacking

Hi!

 

The steps for creating a stack start on page 341 of the Advanced Traffic Management guide - https://support.hpe.com/hpsc/doc/public/display?docId=a00050236en_us

 

Depending on which method you want to use, you can follow the steps in order to create the stack.  Generally the easiest is to have all switches powered off, the cables connected, and power each switch one by one (let the switch fully boot up and join the stack before powering on the next one) and that way, each stack member ID will match the physical switch order.  

 

Regards, 

 

Justin

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: