Hi All,
We need to move the DHCP server function from a Cisco switch to an Aruba Switch (5406). We configure the VLAN interfaces including IP and enable dhcp-server.
We created the address pools correctly, but after activating DHCP Server globally and disabling the cisco switch the stations were unable to receive the IP address.
The output of show dhcp-server binding command was:
Status and Counters - DHCP Server
Address Pools : 18
Automatic Bindings : 10
Manual Bindings : 0
Expired/Free Bindings : 7915
Malformed Messages : 382
Messages Received
BOOTREQUEST : 2824
DHCPDISCOVER : 1275
DHCPREQUEST : 729
DHCPDECLINE : 1
DHCPRELEASE : 10
DHCPINFORM : 809
Messages Sent
BOOTREPLY : 423
DHCPOFFER : 57
DHCPACK : 365
DHCPNAK : 1
The DHCP configuration is similar to this one:
ip route 0.0.0.0 0.0.0.0 10.16.10.254
Ip routing
vlan 10
name "Test_VLAN"
untagged A1,A3
tagged A8
ip address 192.168.1.1 255.255.255.0
dhcp-server
exit
dhcp-server pool "Test-pool"
default-router "192.168.1.1"
dns-server "192.168.1.2"
domain-name "mydomain.com"
netbios-name-server "192.168.1.2"
lease 00:00:05
network 192.168.1.0 255.255.255.0
range 192.168.1.10 192.168.1.200
option 4 ip "192.168.1.2"
option 9 ip "192.168.1.3"
exit
dhcp-server enable
Do you have any tip?
Thank you