Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Occasional Contributor I

[5406] Redundant DHCP Server - Best practice

Hello, I have a scenario with two core switches playing the role of DHCP Server for network stations, what is the best practice for configuring DHCP scopes?

 

Do I replicate the same DHCP configuration on the two core switches?

 

It is being configured around 16 DHCP scopes within the limit of 8192 that the 5400 supports.

 

Note:

 

Between the two switches the VRRP protocol is enabled.

 

Thanks


Accepted Solutions
Highlighted

Re: [5406] Redundant DHCP Server - Best practice

Hi,

 

You can configure two different DHCP scope in two core switches but config with different VLAN from each other. 

 

Regards,

Suresh

 

View solution in original post


All Replies
Highlighted

Re: [5406] Redundant DHCP Server - Best practice

Hi,

 

You can configure two different DHCP scope in two core switches but config with different VLAN from each other. 

 

Regards,

Suresh

 

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: