03-25-2019 01:35 PM
On my 8320 I can see under the router OSPF commands an option to enter passive interface default.
I couldn’t see an option to turn off this command one interface at a time (no passive interface 1/1/1)
How do you allow for certain ports ... or is the switch smart enough to see which ports you have configured for OSPF under this command?
Solved! Go to Solution.
03-26-2019 02:15 PM
You can configure individual interfaces as passive OSPF ports from the interface context:
switch(config)# interface 1/1/1 switch(config-if)# ip ospf passive
Re: 8320 passive interface default
03-27-2019 07:22 AM
Router OSPF 1
Passive interface default
IP OSPF 1 area 0 - this bit here is what I’m unsure about?
Does this command override the passive interface default?
03-27-2019 07:40 AM
Simply no ip ospf passive on the interface.
Here is an example of SVI with ospf:
vrf attach prod
ip address 10.1.251.2/29
ip ospf 10 area 0.0.0.0
no ip ospf passive
ip ospf cost 100