ACL for communication between VLANs
05-25-2020 02:44 PM - edited 05-25-2020 03:00 PM
I have an aruba 2930F switch where I have created 3 vlan
I want vlan 2 and vlan 3 to have full input and output communication with these vlan 1 addresses (192.168.1.71 and 192.168.1.79)
Re: ACL for communication between VLANs
06-07-2020 12:40 AM
can I know where the VLAN 2 & VLAN 3 gateway configured?
If the gateways are configured on the same switch then all end will communicate using local and direct routes from the gateway?
and if VLANs gateways are in different switches then required routing and ACL are required to configure.