Wired Intelligent Edge (Campus Switching and Routing)

Regular Contributor II

Add 3810 switch to Airwave for monitoring

Hi Forum,


I tried to add Airwave as an SNMP server with a community string and that did not work, device shows down in AMP.

I tried (from the HPE OS user guide) >> amp-server ip group 2530 folder 2530 secret secret but that look like what you would use for zero touch provisioning with AMP. it also did not work for me.


any advice is appreciate.

Guru Elite

Re: Add 3810 switch to Airwave for monitoring

You need to confige a SNMP read string on the HPE switch and then put that into airwave.  That is all that you should need.  The amp-server command is something additional, but not is what is necessary.


snmp-server community "public"

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Regular Contributor II

Re: Add 3810 switch to Airwave for monitoring

Thanks. It worked.

Search Airheads
Showing results for 
Search instead for 
Did you mean: