Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Contributor II

AirWave monitoring clients on switches

Hi all,

I haven't been able to figure out if AirWave did this, but I assumed that it did. We have HPE 5400zl switches, and I would love to know at the very least, what client MAC addresses are connected to the ports on them (or were last connected).

 

I had assumed this capability was there, but I sure can't find it, nor find any reference to it.

 

Did I assume incorrectly?

AirWave v8.2.5.1

--Ben


Accepted Solutions
Highlighted
Aruba Employee

Re: AirWave monitoring clients on switches

Not possible today.

View solution in original post


All Replies
Highlighted
Aruba Employee

Re: AirWave monitoring clients on switches

Not possible today.

View solution in original post

Highlighted
Contributor II

Re: AirWave monitoring clients on switches

Pity, I hope that's on a roadmap, it would be an awesome feature.

Highlighted
Occasional Contributor II

Re: AirWave monitoring clients on switches

Any update on this?  Cisco Prime has been doing this for 10 years and is a key feature.

Highlighted
MVP Guru Elite

Re: AirWave monitoring clients on switches

with last release, you have list of mac address

 

if there is LLDP, you can see also on connected device.



PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info

PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info

PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)

PowerArubaIAP: Powershell Module to use Aruba Instant AP

PowerArubaMC: Powershell Module to use Mobility Controller / Master


ACMP 6.4 / ACMX #107 / ACCP 6.5 / ACSP
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: