Wired Intelligent Edge (Campus Switching and Routing)

This community is currently in a read-only state due to a maintenance window. For more info click here
Reply
Highlighted
Occasional Contributor II

Aruba 2530 - Daylight Time

Hi, how set Daylight Time Rule (user-defined) for last Sunday of March and last Sunday of October. This is DTS for Poland/Warsaw.

 

THX

Highlighted
MVP Guru

Re: Aruba 2530 - Daylight Time

time daylight-time-rule western-europe
--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Highlighted
Occasional Contributor II

Re: Aruba 2530 - Daylight Time

I'am test this and not work. This change work back ? after date when time change or only trigger this day ?

 

 

Highlighted
MVP Guru

Re: Aruba 2530 - Daylight Time

To disable:

time daylight-time-rule none

The switch internally works in UTC, so just the representation is changed not the clock itself.

If you want to set the time for Poland, in addition to the daylight-time-rule, you should set the time offset:

time daylight-time-rule western-europe
time timezone 60

If you then configure NTP, all should be set:

timesync ntp
ntp unicast
ntp server 192.168.1.1
ntp server 192.168.4.1
ntp enable

Replace the IP addresses with your NTP IP addresses.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: