Wired Intelligent Edge (Campus Switching and Routing)

Reply
Occasional Contributor II

Aruba-2930F-24G-4SFP ( Layer 3)

 have a switch Aruba-2930F-24G-4SFP ( Layer 3)  But i have a problem about configuration CLI in HP

 

1) i know this commande  in Ciscobut i don't know in Aruba-2930F-24G-4SFP ( Layer 3) 

interface  ethernet  1===> link with switch layer 2 ( DLINK)

switch trunk enpasulation dot1Q

switchport mode trunk

 

how i can configure this CLI  in switch layer 3  HP 2930F:  traduction to HP 

 

thanks in advance i a answer ASAB

Contributor I

Re: Aruba-2930F-24G-4SFP ( Layer 3)

int X untag vlan Y

 

where X is the interface identifier in the Aruba switch, Y is the vlan or list of VLANs you want tagged in 802.1q to traverse that port.

Contributor I

Re: Aruba-2930F-24G-4SFP ( Layer 3)

Hi,

 

see the file in attachment, CLI reference Guide. (equivalance between aruba and cisco)

Mathias Troncoso-Aballay
ACMP, ACCP, ACSA | Aruba Partner Ambassador
MVP Expert

Re: Aruba-2930F-24G-4SFP ( Layer 3)

Personally, given your Cisco versus ArubaOS-Switch commands translation doubts (especially against VLAN tagging and Link Aggregation),...I think this is always illuminating.

Highlighted
Occasional Contributor II

Re: Aruba-2930F-24G-4SFP ( Layer 3)

Hello

 

i have a problem that switch Aruba-2930F-24G-4SFP don't give any address dhcp to PC : i have two vlan 10 and vlan 20 

 

this switch is link to switch DLINK1210-28p

 

so i need a help why pc don't recive any address from pool vlan 10 ?,

 

i give scrpit about HP layer 3 and i need answer ASAB 

 

Occasional Contributor II

Re: Aruba-2930F-24G-4SFP ( Layer 3)

PLease some one can access with team viwer to have idea about problem swith as preffer 

 

please i nees answer urgent about switch layer 3 don't give any pool to desktop 

thanks in advance

Occasional Contributor II

Re: Aruba-2930F-24G-4SFP ( Layer 3)

Aruba-2930F-24G-4SFP# show dhcp-server

Configuration and Status - DHCP Server

DHCP Server Enabled : Yes
DHCPv4 Operational Status : Enabled
Traps Enabled : Yes
Persistent Lease Database : No
Conflict Logging Enabled : No
DHCP VLAN Interfaces :

Contributor I

Re: Aruba-2930F-24G-4SFP ( Layer 3)

seems that u don't have configured properly the dhcp configuration... missed some configuration

 

Please follow these steps and let me know

 

https://www.networktasks.co.uk/environments/hp/provision/dhcp-server-on-hpe-aruba-switch

 

 

Thanks

Mathias Troncoso-Aballay
ACMP, ACCP, ACSA | Aruba Partner Ambassador
Occasional Contributor II

Re: Aruba-2930F-24G-4SFP ( Layer 3)

help me and give me commands missing that allow DHCP switch to give desktop 

i wait to answer urgent 

 

thanks in advance

Contributor I

Re: Aruba-2930F-24G-4SFP ( Layer 3)

you have to create your vlan and assign that vlan the dhcp-server enable

 

 

but before that, your config of the dhcp-server should look like that

 

dhcp-server pool "VLAN-NAME"
authoritative
default-router "192.168.0.1"
dns-server "8.8.8.8,8.8.4.4"
domain-name "test.local"
lease 00:01:00
network 192.168.0.0 255.255.254.0
range 192.168.0.21 192.168.1.149

Mathias Troncoso-Aballay
ACMP, ACCP, ACSA | Aruba Partner Ambassador
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: