Wired Intelligent Edge (Campus Switching and Routing)

Reply
Contributor I

Aruba 3810 & 2540 - LACP configuration

Hi,

 

I wanted to implement LACP for a client.

 

I have two core switches aruba 3810 and for distribution switches aruba 2540.

 

Can you guys help how to configure LACP.

 

I also wanted to know if there's any software simulator like packet tracer for aruba switches.

 

Thanks in advance.

Occasional Contributor II

Re: Aruba 3810 & 2540 - LACP configuration

For LACP you need to create a trunk:

 

Command:

 

trunk 21,22 trk1 lacp

For port 21 and 22

 

For provision (ArubaOS-switch) there is no simulator, for ArubaOS-CX there is.

Contributor I

Re: Aruba 3810 & 2540 - LACP configuration

So configurations are made only on the core switch.

Highlighted
Occasional Contributor II

Re: Aruba 3810 & 2540 - LACP configuration

Hi,

 

Lacp needs to be configured on both sides.

As you have 2 ArubaOS-Switch the command is equal to both switches.

 

Did you configure the core as a stack?

 

Can you share your overall design? Because only implement LACP is not enough.

Contributor I

Re: Aruba 3810 & 2540 - LACP configuration

Hi,

 

Yes it's configured as stack.

 

Here's a brief setup ( find image)

 

 

MVP Expert

Re: Aruba 3810 & 2540 - LACP configuration

Cisco Catalyst style...where are Arubas?

Contributor I

Re: Aruba 3810 & 2540 - LACP configuration

Hi Parnassus,

I was asked for a design, I used packet tracer just to give a quick description.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: