(ArubaS2500-24P) #show log system all
Jan 22 22:34:50 KERNEL: klogd started: BusyBox v1.01 (2018.06.26-11:25+0000)
Jan 22 22:34:50 KERNEL: 0:<5>0:
Jan 22 22:34:50 KERNEL: Aruba Networks
Jan 22 22:34:50 KERNEL: ArubaOS Version 7.4.1.10 (build 65516 / label #65516)
Jan 22 22:34:50 KERNEL: Built by p4build@lesbos on 2018-06-26 at 04:31:13 PDT (gcc version 3.4.3)
Jan 22 22:34:50 KERNEL: 0:Using default Mac address
Jan 22 22:34:50 KERNEL: 0:XLR Physical Address Exclude Region: 0x3c00000
Jan 22 22:34:50 KERNEL: 0:HACK: forcing xlr_board_major_version to ARUBA_CORVINA (7)
Jan 22 22:34:50 KERNEL: 0:<5>511MB HIGHMEM available.
Jan 22 22:34:50 KERNEL: 0:<7>On node 0 totalpages: 262112
Jan 22 22:34:50 KERNEL: 0:<7> DMA zone: 131072 pages, LIFO batch:31
Jan 22 22:34:50 KERNEL: 0:<7> DMA32 zone: 0 pages, LIFO batch:0
Jan 22 22:34:50 KERNEL: 0:<7> Normal zone: 0 pages, LIFO batch:0
Jan 22 22:34:50 KERNEL: 0:<7> HighMem zone: 131040 pages, LIFO batch:31
Jan 22 22:34:50 KERNEL: 0:(PROM) CPU present map: f SOS_CPU_MAP: 0xf0 online CPUs: 0xff cli_cpu:4
Jan 22 22:34:50 KERNEL: 0:Phys CPU present map: f, possible map f
Jan 22 22:34:50 KERNEL: 0:Detected 3 Slave CPU(s)
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-base init
Jan 22 22:34:50 KERNEL: 0:Primary instruction cache 32kB, 8-way, linesize 32 bytes.
Jan 22 22:34:50 KERNEL: 0:Primary data cache 32kB 8-way, linesize 32 bytes.
Jan 22 22:34:50 KERNEL: 0:Setting up NMI Handler for Axxx platforms
Jan 22 22:34:50 KERNEL: 0:mips_hpt_frequency = 733000000
Jan 22 22:34:50 KERNEL: 0:Using 733.000 MHz high precision timer. cycles_per_jiffy=7330000
Jan 22 22:34:50 KERNEL: 0:phoenix_timer_setup: non_core_cpus:3 Maxval:3640e mask:e
Jan 22 22:34:50 KERNEL: 0:phoenix_timer_setup: phoenix_timer_stats = 84004a20, phoenix_timer_diff = 84004a40,
Jan 22 22:34:50 KERNEL: phoenix_timer_count = 84004a60, phoenix_timer_epc = 84004a80,
Jan 22 22:34:50 KERNEL: phoenix_timer_cpu = 84004aa0, phoenix_timer_gettimeoffset = 84004ac0
Jan 22 22:34:50 KERNEL: max_val[0] = a2c2a, max_val[others] = 3640e,
Jan 22 22:34:50 KERNEL: 0:<6>Memory: 701064k/252416k available (4154k kernel code, 74788k reserved, 860k data, 59508k init, 524160k highmem)
Jan 22 22:34:50 KERNEL: 0:<7>Calibrating delay loop... 0:167.11 BogoMIPS (lpj=835584)
Jan 22 22:34:50 KERNEL: 0:<6>Security Framework v1.0.0 initialized
Jan 22 22:34:50 KERNEL: 0:<6>Capability LSM initialized
Jan 22 22:34:50 KERNEL: 0: available.
Jan 22 22:34:50 KERNEL: 0:(PROM): waking up phys cpu# 1, bucket_1, gp = 84ace000
Jan 22 22:34:50 KERNEL: 0:(PROM): sent a wakeup message to bucket 1
Jan 22 22:34:50 KERNEL: 1:Initializing CPU:0 (1), current=84ab4048, gp = 84ace000
Jan 22 22:34:50 KERNEL: 1:<7>Calibrating delay loop... 1:173.67 BogoMIPS (lpj=868352)
Jan 22 22:34:50 KERNEL: 1:<7>Calibrating delay loop... 1:173.26 BogoMIPS (lpj=866304)
Jan 22 22:34:50 KERNEL: 0:(PROM): waking up phys cpu# 2, bucket_2, gp = 84af6000
Jan 22 22:34:50 KERNEL: 0:(PROM): sent a wakeup message to bucket 2
Jan 22 22:34:50 KERNEL: 2:Initializing CPU:0 (2), current=84abb028, gp = 84af6000
Jan 22 22:34:50 KERNEL: 2:<7>Calibrating delay loop... 2:247.39 BogoMIPS (lpj=1236992)
Jan 22 22:34:50 KERNEL: 0:(PROM): waking up phys cpu# 3, bucket_3, gp = 84afe000
Jan 22 22:34:50 KERNEL: 0:(PROM): sent a wakeup message to bucket 3
Jan 22 22:34:50 KERNEL: 3:Initializing CPU:0 (3), current=84ad4048, gp = 84afe000
Jan 22 22:34:50 KERNEL: 3:<7>Calibrating delay loop... 3:374.37 BogoMIPS (lpj=1871872)
Jan 22 22:34:50 KERNEL: 0:<6>Brought up 4 CPUs
Jan 22 22:34:50 KERNEL: 1:migration_cost=1:100001:
Jan 22 22:34:50 KERNEL: 0:<5>detected lzma initramfs
Jan 22 22:34:50 KERNEL: 0:<5>initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=165816832
Jan 22 22:34:50 KERNEL: :.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0:.0
Jan 22 22:34:50 KERNEL: 0:<6>Initializing Aruba nodeinfo Netlink Socket
Jan 22 22:34:50 KERNEL: 0:[pcibios_init]: IO-Remapped phys=10000000, size=1000000 to vaddr=b0000000
Jan 22 22:34:50 KERNEL: 0:[pcibios_init]: IO-Remapped phys=15000000, size=100000 to vaddr=b5000000
Jan 22 22:34:50 KERNEL: 0:Registering XLR/XLS PCIX/PCIE Controller.
Jan 22 22:34:50 KERNEL: 0:<5>SCSI subsystem initialized
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facilities init
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-heartbeat init
Jan 22 22:34:50 KERNEL: 0:highmem bounce pool size: 64 pages
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-core init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-fs init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-ipc init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-kernel_arch init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-kernel init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-locking init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-memory init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-network init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-process init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-socket init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-timer init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-statedump init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-network_ip_interface init in kernel
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-core init as module
Jan 22 22:34:50 KERNEL: 0:<6>ltt-control init
Jan 22 22:34:50 KERNEL: 0:<6>LTT : ltt-facility-statedump init
Jan 22 22:34:50 KERNEL: 0:<6>hw_random hardware driver 1.0.0 loaded
Jan 22 22:34:50 KERNEL: 0:Registered XLR tracebuffer driver with Major No. [0]
Jan 22 22:34:50 KERNEL: 0:[drivers/char/xlrinfo/xlrinfo.c@419|xlrinfo_init]: cpu_0: xlrinfo_init: BEGIN RMIINFO_INIT
Jan 22 22:34:50 KERNEL: 0:Registered sos console serial driver
Jan 22 22:34:50 KERNEL: 0:Coredump handling done by CPU3
Jan 22 22:34:50 KERNEL: 0:upic initialization done
Jan 22 22:34:50 KERNEL: 0:System time change notify driver inited
Jan 22 22:34:50 KERNEL: 0:Function [virtual_uart_init]Loader support not enabled. Returning from virtual_uart_init
Jan 22 22:34:50 KERNEL: 0:RAMDISK driver initialized: 16 RAM disks of 87040K size 1024 blocksize
Jan 22 22:34:50 KERNEL: 0:[user_mac_init]: user_mac_data=0x52ed28, psb_shm_size=0x800000
Jan 22 22:34:50 KERNEL: 0:Registered phoenix user_mac driver: major=0
Jan 22 22:34:50 KERNEL: 0:[drivers/net/sos_msg.c@3875|sos_msg_init_module]: cpu_0: Registering sos_msg_driver
Jan 22 22:34:50 KERNEL: ask:0xe0 from 1 to 2
Jan 22 22:34:50 KERNEL: 0:rtgw_tunnel_init
Jan 22 22:34:50 KERNEL: 0:stacking interface driver 0:inited
Jan 22 22:34:50 KERNEL: 0:Loopback interface driver inited
Jan 22 22:34:50 KERNEL: 0:<6>PPP generic driver version 2.4.2
Jan 22 22:34:50 KERNEL: 0:<6>PPP Deflate Compression module registered
Jan 22 22:34:50 KERNEL: 0:<6>PPP BSD Compression module registered
Jan 22 22:34:50 KERNEL: 0:<5>physmap flash device: 1000000 at 1c000000
Jan 22 22:34:50 KERNEL: 0:<6>phys_mapped_flash: Found 1 x16 devices at 0x0 in 8-bit bank
Jan 22 22:34:50 KERNEL: 0: Amd/Fujitsu Extended Query Table at 0x0040
Jan 22 22:34:50 KERNEL: 0:<4>phys_mapped_flash: CFI does not contain boot bank location. Assuming top.
Jan 22 22:34:50 KERNEL: 0:<5>number of CFI chips: 1
Jan 22 22:34:50 KERNEL: 0:Parsing the partition info
Jan 22 22:34:50 KERNEL: 0:Adding partitions...
Jan 22 22:34:50 KERNEL: 0:<5>Using physmap partition definition
Jan 22 22:34:50 KERNEL: 0:<5>Creating 2 MTD partitions on "phys_mapped_flash":
Jan 22 22:34:50 KERNEL: 0:<5>0x00000000-0x00220000 : "bootROM"
Jan 22 22:34:50 KERNEL: 0:<5>0x00220000-0x00800000 : "nvram-eeprom"
Jan 22 22:34:50 KERNEL: 0:<6>ehci-xls ehci-xls.0: XLS EHCI Host Controller
Jan 22 22:34:50 KERNEL: 0:<6>ehci-xls ehci-xls.0: new USB bus registered, assigned bus number 1
Jan 22 22:34:50 KERNEL: 0:<6>ehci-xls ehci-xls.0: irq 39, io mem 0x1ef24000
Jan 22 22:34:50 KERNEL: 0:<6>ehci-xls ehci-xls.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 22 22:34:50 KERNEL: 0:USB Device: 0x00000000
Jan 22 22:34:50 KERNEL: 0:USB Product: XLS EHCI Host Controller
Jan 22 22:34:50 KERNEL: 0:USB Manufacturer: Linux 2.6.16 ehci_hcd
Jan 22 22:34:50 KERNEL: 0:USB SerialNumber: ehci-xls
Jan 22 22:34:50 KERNEL: 0:<6>usb usb1: c->desc.bMaxPower 0, udev->busmA 0
Jan 22 22:34:50 KERNEL: 0:<6>usb usb1: configuration #1 chosen from 1 choice
Jan 22 22:34:50 KERNEL: 0:<6>hub 1-0:1.0: USB hub found
Jan 22 22:34:50 KERNEL: 0:<6>hub 1-0:1.0: 2 ports detected
Jan 22 22:34:50 KERNEL: 0:<7>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Jan 22 22:34:50 KERNEL: 0:<6>ohci-xls ohci-xls.1: XLS OHCI Host Controller
Jan 22 22:34:50 KERNEL: 0:<6>ohci-xls ohci-xls.1: new USB bus registered, assigned bus number 2
Jan 22 22:34:50 KERNEL: 0:<6>ohci-xls ohci-xls.1: irq 39, io mem 0x1ef24400
Jan 22 22:34:50 KERNEL: 0:USB Device: 0x00000000
Jan 22 22:34:50 KERNEL: 0:USB Product: XLS OHCI Host Controller
Jan 22 22:34:50 KERNEL: 0:USB Manufacturer: Linux 2.6.16 ohci_hcd
Jan 22 22:34:50 KERNEL: 0:USB SerialNumber: ohci-xls
Jan 22 22:34:50 KERNEL: 0:<6>usb usb2: c->desc.bMaxPower 0, udev->busmA 0
Jan 22 22:34:50 KERNEL: 0:<6>usb usb2: configuration #1 chosen from 1 choice
Jan 22 22:34:50 KERNEL: 0:<6>hub 2-0:1.0: USB hub found
Jan 22 22:34:50 KERNEL: 0:<6>hub 2-0:1.0: 1 port detected
Jan 22 22:34:50 KERNEL: 0:<6>ohci-xls ohci-xls.2: XLS OHCI Host Controller
Jan 22 22:34:50 KERNEL: 0:<6>ohci-xls ohci-xls.2: new USB bus registered, assigned bus number 3
Jan 22 22:34:50 KERNEL: 0:<6>ohci-xls ohci-xls.2: irq 39, io mem 0x1ef24800
Jan 22 22:34:50 KERNEL: 0:USB Device: 0x00000000
Jan 22 22:34:50 KERNEL: 0:USB Product: XLS OHCI Host Controller
Jan 22 22:34:50 KERNEL: 0:USB Manufacturer: Linux 2.6.16 ohci_hcd
Jan 22 22:34:50 KERNEL: 0:USB SerialNumber: ohci-xls
Jan 22 22:34:50 KERNEL: 0:<6>usb usb3: c->desc.bMaxPower 0, udev->busmA 0
Jan 22 22:34:50 KERNEL: 0:<6>usb usb3: configuration #1 chosen from 1 choice
Jan 22 22:34:50 KERNEL: 0:<6>hub 3-0:1.0: USB hub found
Jan 22 22:34:50 KERNEL: 0:<6>hub 3-0:1.0: 1 port detected
Jan 22 22:34:50 KERNEL: 0:<6>USB Universal Host Controller Interface driver v2.3
Jan 22 22:34:50 KERNEL: 0:<6>Initializing USB Mass Storage driver...
Jan 22 22:34:50 KERNEL: 0:<6>usb 2-1: new full speed USB device using ohci-xls and address 2
Jan 22 22:34:50 KERNEL: 0:<6>usb 2-1: not running at top speed; connect to a high speed hub
Jan 22 22:34:50 KERNEL: 0:USB Device: 0x058f6387
Jan 22 22:34:50 KERNEL: 0:USB Product: USB DISK
Jan 22 22:34:50 KERNEL: 0:USB Manufacturer: SMI Corporation
Jan 22 22:34:50 KERNEL: 0:USB SerialNumber: AA04012700014023
Jan 22 22:34:50 KERNEL: 0:<6>usb 2-1: c->desc.bMaxPower 50, udev->busmA 500
Jan 22 22:34:50 KERNEL: 0:<6>usb 2-1: configuration #1 chosen from 1 choice
Jan 22 22:34:50 KERNEL: 0:<6>scsi0 : SCSI emulation for USB Mass Storage devices
Jan 22 22:34:50 KERNEL: 0:<6>USB Mass Storage support registered.
Jan 22 22:34:50 KERNEL: 0:Intializing I2C Host Adapter...0:done.
Jan 22 22:34:50 KERNEL: 0:<7>usb-storage: device found at 2
Jan 22 22:34:50 KERNEL: 0:<7>usb-storage: waiting for device to settle before scanning
Jan 22 22:34:50 KERNEL: 0:i2c-palm-bk3220: Added I2C Bus 0
Jan 22 22:34:50 KERNEL: 0:Intializing I2C Host Adapter...0:done.
Jan 22 22:34:50 KERNEL: 0:i2c-palm-bk3220: Added I2C Bus 1
Jan 22 22:34:50 KERNEL: 0:<6>i2c-corvina: using default base 0xbef18000
Jan 22 22:34:50 KERNEL: 0:isl1221_init: skipping isl1221 rtc initialization
Jan 22 22:34:50 KERNEL: 0:<6>m41t11 3-0068: Found M41T11 RTC on Virtual I2C (i2c-0, mux 70:00) at 68
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 4-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:01) at 50
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 5-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:02) at 50
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 6-0052: Found eeprom on Virtual I2C (i2c-0, mux 70:03) at 52
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 7-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:04) at 50
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 7-0051: Found eeprom on Virtual I2C (i2c-0, mux 70:04) at 51
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 7-0053: Found eeprom on Virtual I2C (i2c-0, mux 70:04) at 53
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 7-0056: Found eeprom on Virtual I2C (i2c-0, mux 70:04) at 56
Jan 22 22:34:50 KERNEL: Found eeprom on Virtual I2C (i2c-0, mux 70:05) at 50
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 8-0051: Found eeprom on Virtual I2C (i2c-0, mux 70:05) at 51
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 8-0053: Found eeprom on Virtual I2C (i2c-0, mux 70:05) at 53
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 8-0056: Found eeprom on Virtual I2C (i2c-0, mux 70:05) at 56
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 9-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:06) at 50
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 9-0051: Found eeprom on Virtual I2C (i2c-0, mux 70:06) at 51
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 9-0053: Found eeprom on Virtual I2C (i2c-0, mux 70:06) at 53
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 9-0056: Found eeprom on Virtual I2C (i2c-0, mux 70:06) at 56
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 10-0050: Found eeprom on Virtual I2C (i2c-0, mux 70:07) at 50
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 10-0051: Found eeprom on Virtual I2C (i2c-0, mux 70:07) at 51
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 10-0053: Found eeprom on Virtual I2C (i2c-0, mux 70:07) at 53
Jan 22 22:34:50 KERNEL: 0:<6>eeprom 10-0056: Found eeprom on Virtual I2C (i2c-0, mux 70:07) at 56
Jan 22 22:34:50 KERNEL: 0:<6>pca954x 0-0070: Registered 8 virtual busses for I2C switch pca9548
Jan 22 22:34:50 KERNEL: 0:<6>i2c_adapter i2c-1: pca954x not found or failed to read reg at 0x71
Jan 22 22:34:50 KERNEL: 0:<6>i2c_adapter i2c-1: pca954x not found or failed to read reg at 0x72
Jan 22 22:34:50 KERNEL: 0:<6>i2c_adapter i2c-1: pca954x not found or failed to read reg at 0x73
Jan 22 22:34:50 KERNEL: 0:Registering Phoenix I2C based TPM driver...
Jan 22 22:34:50 KERNEL: 0:<6>w83793 9-002d: Found W83793 on Virtual I2C (i2c-0, mux 70:06) at 2d
Jan 22 22:34:50 KERNEL: 0:<6>lm75 6-0048: Found LM75 on Virtual I2C (i2c-0, mux 70:03) at 48
Jan 22 22:34:50 KERNEL: 0:<6>lm75 8-0048: Found LM75 on Virtual I2C (i2c-0, mux 70:05) at 48
Jan 22 22:34:50 KERNEL: 0:<6>lm75 8-0049: Found LM75 on Virtual I2C (i2c-0, mux 70:05) at 49
Jan 22 22:34:50 KERNEL: 0:<6>lm75 8-004a: Found LM75 on Virtual I2C (i2c-0, mux 70:05) at 4a
Jan 22 22:34:50 KERNEL: 0:<6>lo: Disabled Privacy Extensions
Jan 22 22:34:50 KERNEL: 0:<6>IPv6 over IPv4 tunneling driver
Jan 22 22:34:50 KERNEL: 0:<6>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
Jan 22 22:34:50 KERNEL: 0:<6>All bugs added by David S. Miller <davem@redhat.com>
Jan 22 22:34:50 KERNEL: 0:<5> Vendor: 0:S0:M0:I0: 0: 0: 0: 0: 0: Model: 0:U0:S0:B0: 0:D0:I0:S0:K0: 0: 0: 0: 0: 0: 0: 0: 0: Rev: 0:10:10:00:00:
Jan 22 22:34:50 KERNEL: 0:<5> Type: Direct-Access 0: ANSI SCSI revision: 000:
Jan 22 22:34:50 KERNEL: 0:<5>SCSI device sda: 1957888 512-byte hdwr sectors (1002 MB)
Jan 22 22:34:50 KERNEL: 0:<5>sda: Write Protect is off
Jan 22 22:34:50 KERNEL: 0:<7>sda: Mode Sense: 43 00 00 00
Jan 22 22:34:50 KERNEL: 0:<3>sda: assuming drive cache: write through
Jan 22 22:34:50 KERNEL: 0:<5>SCSI device sda: 1957888 512-byte hdwr sectors (1002 MB)
Jan 22 22:34:50 KERNEL: 0:<5>sda: Write Protect is off
Jan 22 22:34:50 KERNEL: 0:<7>sda: Mode Sense: 43 00 00 00
Jan 22 22:34:50 KERNEL: 0:<3>sda: assuming drive cache: write through
Jan 22 22:34:50 KERNEL: 0:<6> sda:0: sda10: sda20: sda30:
Jan 22 22:34:50 KERNEL: 0:<5>sd 0:0:0:0: Attached scsi disk sda
Jan 22 22:34:50 KERNEL: 0:<7>usb-storage: device scan complete
Jan 22 22:34:50 KERNEL: 3:<6>kjournald starting. Commit interval 5 seconds
Jan 22 22:34:50 KERNEL: 3:<6>EXT3 FS on sda3, 3:internal journal
Jan 22 22:34:50 KERNEL: 3:<6>EXT3-fs: mounted filesystem with ordered data mode.
Jan 22 22:34:50 KERNEL: 3:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
Jan 22 22:34:50 KERNEL: 3:<3>aruba_n_nl_rcv_msg: passed module #(3) doesn't match with registered one(0)
Jan 22 22:34:50 KERNEL: 3:<4>process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
Jan 22 22:34:50 KERNEL: 3:Send 3 start
Jan 22 22:34:50 KERNEL: 3:Send 2 start
Jan 22 22:34:50 KERNEL: 3:Send 1 start
Jan 22 22:34:50 KERNEL: 3:TPM driver running in 3204 mode
Jan 22 22:34:50 KERNEL: 3:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
Jan 22 22:34:51 KERNEL: 0:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
Jan 22 22:34:51 KERNEL: 3:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
Jan 22 22:34:51 KERNEL: 2:<6>aruba_n_nl_rcv_msg: Registering module(3), buffer len:82
Jan 22 22:34:51 KERNEL: 2:<6>aruba_n_nl_rcv_msg: Registered a new module(3), buffer len(82)
Jan 22 22:34:52 KERNEL: 3:<3>aruba_n_nl_rcv_msg: passed module #(1) doesn't match with registered one(0)
Jan 22 22:34:53 KERNEL: 2:eth1.4095: Setting MAC address to 2: 002: 0b2: 862: 012: 002: 002:.
Jan 22 22:34:53 KERNEL: 2:VLAN (eth1.4095): Setting underlying device (eth1) to promiscious mode.
Jan 22 22:34:53 KERNEL: 1:<6>aruba_n_nl_rcv_msg: Registering module(1), buffer len:9
Jan 22 22:34:53 KERNEL: 1:<6>aruba_n_nl_rcv_msg: Registered a new module(1), buffer len(9)
Jan 22 22:34:53 :399816: <ERRS> |dpa| mrvl_init_new_dev: /dev/ppe0 not found. Marvel Device initialization failed
Jan 22 22:34:54 KERNEL: 0:0 do_newlink
Jan 22 22:34:54 KERNEL: 0:1 do_newlink
Jan 22 22:34:54 KERNEL: 0:0 do_newlink
Jan 22 22:34:54 KERNEL: 0:1 do_newlink
Jan 22 22:35:00 :303073: <ERRS> |nanny| Process /mswitch/bin/dpa [pid 1431] died: got signal SIGABRT
Jan 22 22:35:00 :303080: <ERRS> |nanny| Please tar and email the file crash.tar to support@arubanetworks.com
Jan 22 22:35:00 :303081: <ERRS> |nanny| To tar type the following commands at the Command Line Interface: (1) tar crash (2) copy flash: crash.tar tftp: [serverip] [destn filename]
Jan 22 22:35:03 :303029: <ERRS> |nanny| Process /mswitch/bin/dpa [pid 1431]: crash data saved in dir /flash//crash/process/1-22-2019@22-35-00/dpa@1431
Jan 22 22:35:03 :303025: <ERRS> |nanny| Found core file /tmp/core.1431.dpa.S2500_65516, 24412160 bytes, compressing...
Jan 22 22:35:22 KERNEL: 1:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
Jan 22 22:35:22 KERNEL: 1:<6>aruba_n_nl_rcv_msg: GET data request for module's(3), buffer len=82
Jan 22 22:35:25 KERNEL: 0:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
Jan 22 22:35:27 :341508: <WARN> |stackmgr| stack-manager mac-persist timer changed to 15
Jan 22 22:35:27 :341507: <WARN> |stackmgr| stack-manager election-priority for member 0 changed to:128
Jan 22 22:35:30 :303079: <ERRS> |nanny| Restarted process /mswitch/bin/dpa, new pid 2819
Jan 22 22:35:31 KERNEL: 3:<6>aruba_n_nl_rcv_msg: GET data request for module's(1), buffer len=9
Jan 22 13:35:33 :399816: <ERRS> |dpa| mrvl_init_new_dev: /dev/ppe0 not found. Marvel Device initialization failed
Jan 22 22:35:38 :341533: <WARN> |stackmgr| Member 00:0b:86:a5:41:00 has Connected
Jan 22 13:35:38 KERNEL: 1:<6>aruba_n_nl_rcv_msg: Setting module's(1) buffer. Len of buffer=9