Wired Intelligent Edge (Campus Switching and Routing)

Reply
Highlighted
Occasional Contributor II

Aruba switches ip dns server-address command

Do a switch needs to setup with ip dns server-address command? Do we need this on every switch? What is the significance of it? Where we have to use this?

MVP Expert

Re: Aruba switches ip dns server-address command

Hi,

 

It is only if you want to have DNS resolution on the switch

for example for ping with this setting, you can use ping www.example.com




PowerArubaSW: Powershell Module to use Aruba Switch API for Vlan, VlanPorts, LACP, LLDP... More info


PowerArubaCP: Powershell Module to use ClearPass API (create NAD, Guest...) More info


PowerArubaCX: Powershell Module to use ArubaCX API (get interface/vlan/ports info)


PowerArubaIAP: Powershell Module to use Aruba Instant AP




ACMP 6.4 / ACMX #107 / ACCP 6.5

Re: Aruba switches ip dns server-address command

Hi Nick,

As Alexis said, you need it whe resolving a name to an IP address.

If your switch will work with Aruba Central, for example, it will need to connect to Aruba Central Service, and your switch will have to resolve the name of the Aruba Central server to connect.

So, your switch will needs the DNS server configured if it will connect to a server on Internet using the name of the server. All switches with this need will need to have the DNS server configured, otherwise, they will have problems to connect.

Regards

 

PS: If this helps you, do not forget to give me some kudos


PS: If you feel this information is useful and solved your question or problem, please do not forget to mark it as a solution and give me some kudos.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: